Id-Net™ Gateway - Datalogic DS6400 Reference Manual

A
ID-NET™ GATEWAY
The CBX800 Gateway can be used to integrate a DS6400 reader into a high speed ID-
NET™ network consisting of different scanners not provided with a Lonworks interface.
In this case the DS6400 uses its main RS232/RS485 interface to communicate with the
CBX800.
Power
6
1
DS6400
Serial (Host)

CBX800 Source Interface (CAB-Sxx)

CBX800 ID-NET™ Interface

Reader ID-NET™ Interface

External Trigger (for On-Line Mode)
Figure 137 – DS6400 Slave/CBX800 Gateway in an ID-NET™ High Speed Network
For 6K family scanners having software version 6.80 or later, an alternative
fixed speed (57600 baud) ID-NET™ layout can be made without the use of
the CBX800 provided:
NOTE
See the ID-NET™ Application Note for details.
132
ID-NET™ Slave Nodes
CBX800
2
5
Matrix 400™
4



the 6K scanner is only an ID-NET™ slave device
the ID-NET™ master is only an SC4000 Controller
DS6400 REFERENCE MANUAL
CBX100
3
7
ID-NET™
Host 2
SC4000
Host 1
ID-NET™
Master
Ethernet TCP/IP (WebSentinel)
Host Aux for CBX800 Configuration
Source Aux for Source Reader Configuration
Reader Auxiliary Interface for Reader Configuration
CBX100
3
7
DS4800