Introduction; Product Description - Datalogic DS6400 Reference Manual

INTRODUCTION

1 INTRODUCTION

1.1 PRODUCT DESCRIPTION

The DS6400 is a high performance laser scanner in a complete range of industrial bar code
readers offering an innovative and modular solution in terms of reading performance,
connectivity and maintenance, in addition to a completely new hardware and software
platform.
The DS6400 has been specifically designed for simple installation, easy use and flexibility.
An innovative mechanical design together with the Datalogic patented Step-a-Head
make it possible to rotate the reader head and the decoder base independently from each
TM
other. Step-a-Head
modifying the orientation of the connector panel while leaving the laser window in the desired
position. The need for space is minimized and installation is easier.
The DS6400 has an innovative linear motor designed to control the focus position of the
scanner via software. This dynamic system, called FLASH
position rail to rail, from the minimum position to the maximum position, in less than 10 msec.
In typical applications, where a DOF <1 meter is required, the focus position is adjusted in 4
msec.
The DS6400 can read all most popular barcodes even in the most difficult conditions, thanks
to a new generation decoder and code reconstruction technology (ACR™ 4).
This reader is also offered in a model with an integrated SW programmable oscillating mirror.
Great attention has been given to built-in connectivity for market standards. A Local
Lonworks network for scanner connectivity (all versions), and a Fieldbus network (Ethernet,
DeviceNet, or Profibus) for host connectivity (dedicated versions) have been integrated in the
decoder base.
Some of the main features of DS6400 are listed below:
scanning speed up to 1200 scans/sec;
2 serial communication interfaces
reading all popular codes;
supply voltage from 15 to 30 Vdc;
electrical connection through connectors;
high speed Lonworks connectivity for Master/Slave layout;
Fieldbus models (Ethernet, Profibus) with built-in connectivity;
programmable in several different operating modes to suit the most various barcode
reading system requirements;
light source: solid state laser diode; the light emitted has a wavelength between
630~680nm.
IP64 protection class of the enclosure (IP50 for older RJ45 Ethernet models).
enables the DS6400 to always be installed in the ideal position, by
TM
, is able to move the focus
1
TM
feature
1