Starting A Push-To-Talk Session From A Push-To-Talk Speaker (Detailed) - CyberData 011182 Operation Manual

Voip singlewire-enabled push-to-talk speaker ral 9002, gray white, standard ral 9003, signal white, optional

Hide thumbs Also See for 011182:

Table of Contents

Product Overview

Starting a Push-to-Talk Session from a Push-to-Talk Speaker (Detailed)

1.10 Starting a Push-to-Talk Session from a Push-to-Talk

Speaker (Detailed)

To start a Push-to-Talk Session from a Push-to-Talk Speaker:

1. The person at the preconfigured Push-to-Talk speaker must press the Remote Call Button. The

speaker will immediately call a specific IP phone.

Figure 9. Press the Remote Call Button

Remote Call Button

Operations Guide

930463C

CyberData Corporation

Table of Contents

Do you have a question about the 011182 and is the answer not in the manual?

011183