Using The Microphone - CyberData 011182 Operation Manual

2.2.15 Using the Microphone

During an active call, the microphone can be used to "talk" to someone at a pre-configured IP phone
extension. See
To set the factory default settings:
1. Press and hold the RTFM button for more than five seconds.
2. The speaker announces that it is restoring the factory default settings.
Note
Operations Guide
Figure 2-10.
The speaker will use DHCP to obtain the new IP address (DHCP-assigned address or
default to 10.10.10.10 if a DHCP server is not present).
930463C
Figure 2-10. Microphone
Installing the Singlewire-enabled Speaker
Set Up and Test the Speaker
Microphone
CyberData Corporation
31