Starting A Push-To-Talk Session From An Ip Phone (Summary); Starting A Push-To-Talk Session From A Push-To-Talk Speaker (Summary) - CyberData 011182 Operation Manual

1.7 Starting a Push-to-Talk Session from an IP Phone
(Summary)
To start a push-to-talk session from an IP phone:
1. Make sure that the Cisco environment is set it up with the Intercom Service.
2. On the Cisco IP phone, select the Service button.
3. Select the Informacast Intercom Service.
4. On the Cisco IP phone, dial the extension number for the Speaker that you want to call.
5. When the call from the Cisco IP phone to the Speaker is active, you can do one of the following:
• Select the Listen button on the phone to listen to someone talking into the Speaker.
• Select the Talk button on the phone to talk to someone listening to the Speaker.
Note
6. Select the Exit button to terminate the call.
Note
1.8 Starting a Push-to-Talk Session from a Push-to-Talk
Speaker (Summary)
To start a push-to-talk session from a push-to-talk speaker:
1. Make sure that the Cisco environment is set it up with the Intercom Service.
2. Press the Remote Call Button to make the Singlewire-enabled Speaker dial a pre-programmed
3. When the call from the Singlewire-enabled Speaker to the Cisco IP phone is active, you can do
• Select the Listen button on the phone to listen to someone talking into the Speaker.
• Select the Talk button on the phone to talk to someone listening to the Speaker.
Note
4. Select the Exit button to terminate the call.
Note
Operations Guide
The IP phone always controls the talking and listening feature of the Speaker.
For a more detailed explanation of this procedure with pictures, see
Push-to-Talk Session from an IP Phone
IP phone extension.
one of the following:
The IP phone always controls the talking and listening feature of the Speaker.
For a more detailed explanation of this procedure with pictures, see
Push-to-Talk Session from a Push-to-Talk Speaker

Starting a Push-to-Talk Session from an IP Phone (Summary)

(Detailed)".
930463C
Product Overview
Section 1.9, "Starting a
Section 1.10, "Starting a
(Detailed)".
CyberData Corporation
6