Section 3 Cabling Requirements And Specifications - NEC UNIVERGE SV810 User Manual

UNIVERGE SV8100
The CD-CP00-US provides:













C
S 3
ABLING
ECTION
This section provides cabling requirements and specifications for various equipment
used in the SV8100 system.
Only the DT300/DT700, D
telephones and wireless telephones discussed in the document can be installed on
the SV8100 system.
General Description Manual
200 trunk ports maximum
512 extension ports maximum
512 ports digital/IP extensions maximum
256 analog ports maximum
256 virtual extensions
Connection for 32/64/128 VoIP Daughter Board (PZ-32IPLA/PZ-64IPLA/
PZ-128IPLA)
Connection for Voice Mail Daughter Board (PZ-VM21)
Connection for Expanded Memory (PZ-ME50-US)
Supports TAPI 1.x
1 Green Status LED
4 Red Status LEDs
5 diagnostic LEDs which indicate the status of various system functions
During normal operation, the "RUN" LED will be flashing and the remaining
LEDs will be off.
700x700 Time Division Multiplex Switch (TDM Switch)
Digital Phase Locked Loop (DPLL)
R
EQUIREMENTS AND
term
To avoid damage to equipment, do not install the
term
D
DTP) terminal uses -24V and has no protection from
the -48V power supply used by the SV8100 system.
S
PECIFICATIONS
Series i telephones, single line telephones, cordless
70 on the SV8100 system. The D
Issue 3.0
term
70 (DTU/
5 - 7