Specifications; Section 3 Specifications - NEC SV9100 Setup Manual

S 3 S
ECTION PECIFICATIONS
The following are specifications of the UT880.
Main Item
CPU
Flash Memory
System
SDRAM
CODEC
Handset
Voice Interface Headset
Speaker Phone
LAN
Network PC
Bluetooth
SV9100 Dialer Setup Guide (Multiline Telephone)
2.1.3 Using DHCP
To use Dynamic IP Addressing via DHCP, refer to the following procedure:
1. Press the Settings
2. Choose Ethernet Settings.
3. Select Ethernet configuration.
4. Select DHCP on Connection Type and click Save.
2.1.4 Using Static IP
The following procedure is to change the IP Address of the UT880 or
change the obtaining IP address method from DHCP to Static IP in
accordance to the network environment.
1. Press the Settings
2. Choose Ethernet Settings.
3. Select Ethernet configuration.
4. Select Static IP on Connection Type menu.
5. Enter IP Address, Netmask, DNS, Default Router and press Save.
Sub Item
ARM Cortex-A9 Dual MicroProcessor with 512KB L2 Cache
4GB NAND Flash
1 GB DDR2 SDRAM
G.711u/a, G.729, G.722, H.264
Supported
Supported
Supported
10/100/1000Base-T with Auto MDIX
10/100/1000Base-T with Auto MDIX
BT V2.1+EDR
icon on APPS.
icon on APPS.
Specification
Issue 1.0
1-3