Station Hunt - NEC UNIVERGE SV810 User Manual

Issue 3.0 UNIVERGE SV8100
When placing a Speed Dialing call, the system normally routes the call through Trunk
Group Routing or ARS (whichever is enabled). Or, the user can preselect a specific
trunk for the call. In addition, the system can optionally force System Speed Dialing
numbers to route over a specific Trunk Group. User preselection always overrides
the system routing.
System Bins Limited to 1000 with Speaker Key or 2 Service Code
#
Though there are 2000 Speed Dialing bins available in the system, once
programmed, these bins can currently only be dialed using the Directory Dial feature
(Press Directory key + SYS softkey + use arrow keys to locate number, or enter the
Speed Dial bin name + Speaker to place call.)
The Speaker and service code 2 operations are not available for any 4-digit Speed
#
Dial System bin number.
DSS Console Chaining
DSS Console chaining allows an extension user with a DSS Console to chain to a
Speed Dialing number stored under a DSS Console key. The stored number dials out
(chains) to the initial call. This can, for example, simplify dialing when calling a
company with an Automated Attendant. You can program the bin for the company
number under one DSS Console key (e.g., 200) and the client extension number
#
under the other (e.g., 201). The DSS Console user can press the first key to call the
#
company, wait for the Automated Attendant to answer, then press the second key to
call the client (extension 400).
The DSS Console user can also chain to a Speed Dialing number dialed manually,
from a Programmable Function Key or a One-Touch Key.
Storing a Flash
To enhance compatibility with connected Centrex and PBX lines, a Speed Dialing bin
can have a stored Flash command. For example, storing 9 Flash 926 5400 causes
the system to dial 9, flash the line, and then dial 926 5400. The Flash can be stored
by the user from their telephone or by the system administrator during system
programming.
Using a Programmable Function Key
To streamline frequently-called numbers, a Speed Dialing Programmable Function
Key can also store a Speed Dialing bin number. When the extension user presses
the key, the telephone automatically dials out the stored number. This provides true
one-touch calling via a telephone function key.

Station Hunt

After calling a busy extension, a call immediately hunts to the next available member
of the Hunt Group (Department Group). The caller does not have to hang up and
place another Intercom call if the first extension called is unavailable.
2 - 56 Features