NEC UNIVERGE SV810 User Manual page 119

UNIVERGE SV8100
Warning Tone for DISA Callers
For DISA callers, with this feature enabled, the warning tone time begins when an
incoming DISA call places an outgoing call and either the inter-digit time expires or
the outgoing call is answered.
If an outside call is transferred to forwarded off-premise using an outside trunk, the
warning tone timer begins immediately. This occurs only if either trunk involved in the
call is programmed for this feature (Program 14-01-17). To transfer a trunk call
off-premise, Program 14-01-13 must be set to 1.
Wireless DECT (SIP)
The Wireless DECT (SIP) (Digital Enhanced Cordless Telecommunication) system
allows using DECT 6.0 DECT (SIP) handsets. These handsets provide the freedom
and convenience of a wireless telephone but also allow access to features provided
by the UNIVERGE SV8100 system.
The number of Wireless DECT (SIP) handsets supported by the UNIVERGE SV8100
is dependant on the number of SIP Client licenses.
Components of the Wireless DECT (SIP) system include the following:
NEC C124 SIP DECT Handset
The handset has the following features:







General Description Manual
Alphanumeric Display with Backlight
LED Indication for Incoming Calls
Telephone Book with 40 entries
While idle, dial the number to be stored, then press > and OK. Enter the name
associated with the number using the dial pad, and press OK.
Silent Mode (mute all sounds)
Redial Function (last 10 numbers)
Press  and continue to press  to scroll through the numbers. Press Hook
key to dial a number.
Programming Pause
A long press on adds a pause to pre-dial or phone book numbers.
#
Adjustable Volume
Ring volume can be adjusted using  and  on the handset.
Issue 3.0
2 - 79