Connecting the Tabletop
Drive Interface and AC
Power Cables
Figure 9 Tabletop SCSI
Interface and Power Cable
Connectors
LTO-3 Half-Height Tape Drive User's Guide
As shown in
figure 9
Half-Height Tape Drives have connectors for:
2
•
Either a 68-pin parallel SCSI cable (two connectors), or a 26-pin SFF-
8088 mini-SAS style interface cable
•
The AC power cable
For the tabletop parallel SCSI drive, either SCSI connector can be used as
a SCSI IN or SCSI OUT connection. This means you can use either
connector to attach the drive to a host computer or to another parallel
SCSI device.
68-pin parallel SCSI connectors
Chapter 2 Installation Procedures
Installing the Tabletop LTO-3 Half-Height Tape Drive
and
figure
10, the rear panels of the tabletop LTO-3
AC power switch
AC power connector
21