Quantum LTO-3 User Manual page 10

Notational Conventions
Related Documents
LTO-3 Half-Height Tape Drive User's Guide
• Chapter 4, Operation, describes the operation and maintenance of the
drive.
• Chapter 5, Theory, describes the theory of operation behind the drive,
including the technology used in various drive components.
• Chapter 6, Specifications, provides drive and cartridge specifications.
• Chapter 7, Troubleshooting Guide
procedures you can follow if you encounter a problem with your
drive.
• Appendix A, Installation
checklists for users who are already familiar with the installation
procedures.
• Appendix B, Disposal of Electrical & Electronic
instructions for proper disposal of unwanted electrical and electronic
equipment.
• Appendix C, Regulatory
with safety and EMC regulations.
This guide also has an index.
This guide uses the following conventions:
Note: Notes emphasize important information related to the main
topic.
Tech Tips provide technical information which may be
Tech Tip:
helpful in performing the procedure.
Cautions indicate potential hazards to equipment and are
Caution:
included to prevent damage to equipment.
Warnings indicate potential hazards to personal safety and
Warning:
are included to prevent injury.
The following subsection identifies the primary documents that are
related to the LTO-3 Half-Height Tape Drive.
provides troubleshooting
Checklists, provides abbreviated quick-start
Compliances, identifies drive compliance
Preface
Equipment, provides
x