Quantum LTO-3 User Manual page 11

LTO-3 Half-Height Tape Drive User's Guide
Standards Conformance
The Small Computer System Interface is described in standards that
include several versions and a number of individual documents. The
original Small Computer System Interface Standard, X3.131-1986, is
referred to as SCSI-1. SCSI-1 was revised, resulting in the Small
Computer System Interface – 2 (X3.131-1994), referred to as SCSI-2. The
set of SCSI-3 standards are collectively referred to as SCSI-3. The
applicable ANSI standards are as follows:
• INCITS Technical Committee T10 (SCSI Storage Interfaces)
Standards:
• SCSI Architecture Model – 2 (SAM-2) INCITS 366-2003
• SCSI Architecture Model – 3 (SAM-3) INCITS 402-2005
• SCSI Architecture Model – 4 (SAM-4) in development
• Automation/Drive Interface – Commands (ADC) INCITS 403-
2005
• Automation/Drive Interface Commands (ADC-2) in
development
• Automation/Drive Interface – Transport Protocol (ADT) INCITS
406-2005
• Automation/Drive Interface – Transport Protocol – 2 (ADT-2) in
development
• Fibre Channel Protocol for SCSI (FCP) INCITS 269-1996
• Fibre Channel Protocol for SCSI, Second Version - 2 (FCP-2)
INCITS 350-2003
• Fibre Channel Protocol for SCSI, Third Version - 3 (FCP-3)
INCITS 416-2006
• Fibre Channel Protocol for SCSI, Fourth Version - 4 (FCP-3) in
development
• SCSI-3 Medium Changer Commands (SMC) INCITS 314-1998
• SCSI Media Changer Commands – 2 (SMC-2) INCITS 382-2004
• SCSI Media Changer Commands – 3 (SMC-3) in development
• SCSI Parallel Interface – 3 (SPI-3) INCITS 336-2000
• SCSI Parallel Interface-4 (SPI-4) INCITS 362-2002
Preface
0
xi