Restarting The Tabletop Drive System; Figure 11 Tabletop Parallel Scsi Bus Termination Examples - Quantum LTO-3 User Manual

Figure 11 Tabletop Parallel
SCSI Bus Termination
Examples
Restarting the Tabletop
Drive System
LTO-3 Half-Height Tape Drive User's Guide
SCSI terminators
External tape drive
External SCSI
device
SCSI controller
(termination
enabled)
Example 1: SCSI termination in a system
that has only external SCSI devices.
After connecting the tabletop drive interface and AC power cables:
2
1 Set the tabletop LTO-3 Half-Height Tape Drive power switch to the
on position.
2 Restart the workstation or server system.
3 Refer to the operating procedures in
tabletop LTO-3 Half-Height Tape Drive comes on and completes the
Power On Self Test (POST) functions.
As required, proceed to either:
• Installing the LTO Driver Software
• Registering the LTO-3 Half-Height Tape Drive
Chapter 2 Installation Procedures
Installing the Tabletop LTO-3 Half-Height Tape Drive
Example 2: SCSI termination in a system that
has both internal and external SCSI devices.
chapter 3
External SCSI device
External tape drive
SCSI controller
(termination disabled)
Internal SCSI
device (termination
enabled
to verify that the
24