Table 4.9 Front Panel Warnings - ashtech Z-Xtreme Operations & Reference Manual

Hide thumbs Also See for Z-Xtreme:
Table of Contents

Advertisement

Table 4.9 describes the possible warnings the receiver may issue.
Warning
Int. Battery Error :
SMBus
Int. Battery Error :
Access
Battery Conditioning
Required
Low Int. Battery:
< 10 min
Low Ext. Battery :
< 30 min
†Memory Test Error :
RAM
†Memory Test Error :
BBRAM
†Memory Test Error :
ROM
†Memory Test Error :
BOOT
No Data Card Detected There is no card in the PCMCIA
Data Card Full
Operations

Table 4.9 Front Panel Warnings

Definition
The SMBus controller (for the
internal battery communication) is
not working
Can't access the internal battery
Internal battery efficiency is down,
it requires a conditioning cycle.
Internal battery remaining life is
< 10 min, the battery needs to be
changed
External battery remaining life is
< 30 min, the battery needs to be
changed. This is only available if
you have entered the parameters
of the external battery via the
$PASHS,POW command.
RAM error
Battery backed
ROM, i.e. Flash
Boot section of the
flash
drive or it cannot be detected; no
recording will be done
No space left on the PC card,
therefore data recording is stopped
Action
Remove battery and reinsert it. If
problem persists, insert a different
battery. If problem still persists, contact
customer support.
Remove battery and reinsert it. If
problem persists, insert a different
battery. If problem still persists, contact
customer support.
Perform battery reconditioning
(depends on the battery, but typically
means full charge, full discharge and
full charge again)
Replace battery with a charged one.
Replace battery with a charged one.
Perform a receiver initialization. If
problem persists, contact customer
support.
Perform a receiver initialization. If
problem persists, contact customer
support.
Perform a receiver initialization. If
problem persists, contact customer
support.
Perform a receiver initialization. If
problem persists, contact customer
support.
Insert or reinsert data card in slot.
Replace current data card with a card
containing available memory, or delete
some older sessions.
41

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents