Port (Fischer) Connectors
Figure 2.5 shows the pin layout for all the serial ports.
Figure 2.1. Table 2.4 provides the serial port pinout description.
Pin
1
12 volts output
2
Ground
3
Clear To Send input
4
Request To Send Output
5
Receive Data input
6
Transmit Data output
7
This pin has the one-pulse-per-second output and the event marker input for
ports B and C respectively. For port A, do not connect any signals; this pins is
for factory use only.
Do not connect or disconnect power or signal cables from the Z-Xtreme while
power is applied. Possible injury and/or equipment damage may occur.
14
2
3
4
5
Figure 2.5 Serial Port Pin Layout
Table 2.4 Serial Port Pinout Description
Description
CAUTION
Z-Xtreme Operations and Reference Manual
1
7
6