Rtk Base; Data Recording (Sessions); Table 4.6 Selectable Data Types - ashtech Z-Xtreme Operations & Reference Manual

kinematic survey; independent from the minimum number of SVs required
to record any data.
• Recording Interval (REC INT:***.*s)
Refer to Table 4.5 for information on available recording intervals.
• Recording Elevation Mask (ELEV MASK**º)
Data from satellites under the elevation mask will not be recorded to the
PCMCIA card.
• Display Mode (MODE:********
Receiver displays the parameters relevant to survey mode selected.

RTK BASE

• Base Port and Data Type (PORT/TYPE) submenu
This submenu displays/sets the RTK data type sent by the RTK Base on
each of the four ports available.
Table 4.6 lists the possible data types.
Data Type
DBEN
RTCM
OFF
• Recording Interval (REC INT:***.*s)
Refer to Table 4.5 for information on available recording intervals.
• Recording Elevation Mask (ELEV MASK**º)
Data from satellites under the elevation mask will not be recorded to the
PCMCIA card.
• Display Mode (MODE:********
Receiver displays the parameters relevant to survey mode selected.

Data Recording (Sessions)

This menu lets you control the data recording sessions.
• Stop Session
Closes the session and stops recording (this function is performed
automatically when the receiver is powered off). This command must be
entered prior to extracting the PCMCIA card if the receiver is recording
data. Failure to do so may cause loss of data and card corruption.
• Start Session
Opens session and begins recording (the action is performed
automatically when inserting a new PCMCIA card or applying power to the
38
STATIC/KINEMATIC/RTK BASE

Table 4.6 Selectable Data Types

Description
Ashtech RTK base compact binary format
RTCM type 18/19 and 3/22 are enabled
No RTK base data sent on that port
STATIC/KINEMATIC/RTK BASE
Z-Xtreme Operations and Reference Manual
)
)