Remaining Power - ashtech Z-Xtreme Operations & Reference Manual

The receiver can check the amount of memory remaining on the PCMCIA card. To
view the remaining memory, perform the following steps:
1. From the main menu, press ↑ < 2 seconds until
selected, press ↓ >2 seconds.
2. With
SYSINFO
3. Within the
SYSINFO
MEM:xxx%
appears on the screen.

Remaining Power

To view the remaining power of the internal battery, perform the following steps:
1. From the main menu, press ↑ < 2 seconds until
selected, press ↓ >2 seconds.
2. With
SYSINFO
3. Within the
SYSINFO
BAT:**MIN
is selected.
This display, exclusively used for an internal battery, is only accurate when battery conditioning has
been performed.
Getting Started
submenu, press ↑< 2 seconds repeatedly until
submenu, press ↑< 2 seconds repeatedly until
is selected.
SYSINFO
is selected.
SYSINFO
27