Static; Kinematic; Table 4.5 Selectable Recording Intervals - ashtech Z-Xtreme Operations & Reference Manual

STATIC

• Recording Interval (REC INT:***.*s)
Table 4.5 lists the values for which you can set the second and subsecond
recording intervals.

Table 4.5 Selectable Recording Intervals

*Only integer number of seconds are allowed (e.g. 1.5 is rejected).
†Only accepted if the fast output option is enabled (F option).
‡0.7 is not accepted because the resulting time tag will not be aligned
with the GPS hour.
• Recording Elevation Mask (ELEV MASK**º)
Data from satellites under the elevation mask will not be recorded to the
PCMCIA card.
• Display Mode (MODE:********
Receiver displays the parameters relevant to the survey mode selected.

KINEMATIC

• Epoch Counter (EPOCH COUNTER:***)
Number of epochs to record on each point.
• Minimum SV required for Kinematic Operation (MIN SV:*)
Receiver beeps indicating there are not enough satellites to continue a
Operations
Subsecond
0.1†
0.2
0.3
0.4
0.5
0.6
N/A‡
0.8
0.9
STATIC/KINEMATIC/RTK BASE
Second*
1
2
3
4
5
6
7
8
9—999 (default is 20)
)
37