System Information (Sysinfo); Receiver Status (Survey:mode); Table 4.2 Main Menu Description - ashtech Z-Xtreme Operations & Reference Manual

Table 4.2 describes the five main menus.
Category Menu Name
System SYSINFO
Information
Survey SURVEY:mode
parameters and
status
Survey SURVCONF
configuration
File management SESSIONS
Receiver control SETTINGS
parameters
The following sections describe each menu. The text within the parentheses
matches the text on the display.

System Information (SysInfo)

This menu lets you obtain basic receiver information such as serial number, options
currently loaded, power and memory status, etc.
• Receiver software version number (VER:****)
Version of firmware installed within the receiver. Record this information in
case you need to contact Customer Support.
• Receiver serial number (S/N:************)
This is the serial number of the receiver. Record this information in case
you need to contact Customer Support.
• Options table (Options:**********)
This string of letters/numbers represents the receiver options loaded in the
receiver (refer to Table 1.3). Record this information in case you need to
contact Customer Support.
• Power Status (BAT:**min)
Indicates the amount of power left in the internal battery, expressed in
remaining time (minutes) based on the current power consumption.
• Memory Status (MEM:***%)
Indicates the percentage of memory left on the PCMCIA card.

Receiver Status (Survey:mode)

This menu allows you to set receiver parameters and obtain basic receiver status
such as current position, number of satellites locked, PDOP, current time, etc.
Operations

Table 4.2 Main Menu Description

Information about the receiver
Parameters that may need to be changed several times per
survey type and current status: Coordinate, time, and
satellite information (mode dependent)
Operational settings users need to modify only once per
survey type (mode dependent)
File management/data recording functions
Receiver settings that users can modify
Description
33