Front Panel - ashtech ZY-12 Information Supplement

Front Panel

The receiver front panel, Figure 1.2, includes an 8-line x 40-character backlit LCD
display, and various keys for controlling the receiver and entering data.
E
F
Table 1.2 describes the keys that activate the receiver's functions.
Key or Function
0 - 9 Pressing a number key calls up a specific screen directly. The lower right corner
of the screen displays the screen number. Whenever the manual discusses a
screen, it identifies the screen by number (e.g., Screen 1, Orbit Information).
The number keys are used to enter alphanumeric data such as latitude, antenna
height, site name. Depending on the particular screen, number keys may have
other functions; for example, the [8] key for 'yes'.
c c Use the c key to cancel the current entry.
e Press the e key to enter data-entry mode, to save values you have entered, and
to go back to higher level displays. (It functions much like the <
computer.)
E F In display mode, use the right arrow E key or the left arrow F key to change to
the next higher or lower numbered screen or subscreen. In data-entry mode,
use the left and right arrow keys to move the cursor to highlight a field or to flash
in a character position where your next entry will go.
G H The up and down arrow G H keys are used to scroll through the different pages
of a screen, or to raise and lower the contrast when only one page is available
and the receiver is in display mode.
General Information
Figure 1.2. Front Panel
Table 1.2. Keys and Functions
Description
G
H
> key on a
ENTER
3