Survey Configuration (Survconf) - ashtech Z-Xtreme Operations & Reference Manual

• Longitude (LON:E/W***º**'**.*****")
• Altitude (ALT:*****.**m)
• Set to current position (HERE)
Sets the base position to the position currently computed by the receiver
(the stand-alone position).
• Survey Status (STATUS)
STATUS is a submenu with information listed in Table 4.3.

Survey Configuration (SURVCONF)

This menu lets you set or change the display item while conducting specific surveys,
dependent on the type of survey being conducted (e.g. the epoch counter in
kinematic mode). There are three modes:
STATIC
KINEMATIC
RTK BASE
The display shows only the items that are significant for the mode selected.
36 Z-Xtreme Operations and Reference Manual