Figure 3.9 Z-Xtreme Power Cable And Pouch For External Power; Figure 3.10 Power Cable Connecting Z-Xtreme And External Battery - ashtech Z-Xtreme System Manual

nects to the Z-Xtreme via a dedicated power cable, Figure 3.9.

Figure 3.9 Z-Xtreme Power Cable and Pouch for External Power

The receiver power cable connects to the receiver via a 3-pin Fischer type connector
located on the back panel of the receiver. The correct connector is labeled 'Power'.
The other end of the external power cable connects to the pouch holding the battery
(Figure 3.10).

Figure 3.10 Power Cable Connecting Z-Xtreme and External Battery

Obviously connection of the battery to the receiver is required prior to powering up the
receiver. The external power source can be connected at any time without concern of
29