CyberData 011211x Operation Manual page 57

2. On the Autoprovisioning Configuration page, you may enter values for the parameters
Web Page Item
Autoprovisioning
Enable Autoprovisioning
Get Autoprovisioning from DHCP
Autoprovisioning Server (IP Address) See
Autoprovisioning Autoupdate 
(in minutes)
3. After changing the parameters, click the Save button.
Operations Guide
indicated in Table 2-17.
Table 2-17. Autoprovisioning Configuration Parameters
Description
See Section 2.4.12.1,
See Section 2.4.12.1,
Section 2.4.12.1, "Autoprovisioning"
Type the desired time (in minutes) that you want the
Autoprovisioning feature to update (6 character limit).
Press the Get Autoprovisioning Template button to get an
autoprovisioning file for this board.
Click the Save button to save your configuration settings.
Note: You need to reboot for changes to take effect.
Click on the Reboot button to reboot the system.
930500I
Installing the VoIP V3 Indoor Intercom
Configure the Autoprovisioning Parameters
"Autoprovisioning".
"Autoprovisioning".
(15 character limit).
CyberData Corporation
50