Customizing Your Phone; Ring Tones And Tone Sets - Mitel 6863i User Manual

Customizing Your Phone

The following paragraphs describe the options available from either the IP phone UI, the Mitel Web UI, or both, and pro-
vide procedures applicable to the option.

Ring Tones and Tone Sets

You can configure ring tones and ring tone sets on the IP phone.
Ring Tones
There are several distinct ring tones a user can select to set on the IP phones. In addition to the 15 pre-installed ringtones,
custom ring tones can be manually installed through the Web UI and selected for use (if enabled by your Administrator).
You can enable/disable these ring tones on a global or per-line basis.
The following table identifies the valid settings and default values for each type of configuration method:
Ring Tones
Configuration Method
IP Phone UI
Mitel Web UI
Lines 1 to 2
Ring Tone Sets
In addition to ring tones, you can configure ring tone sets on a global-basis on the IP phone. Ring tone sets consist of
tones customized for a specific country. The ring tone sets you can configure on the IP phones are:
• Australia
• Brazil
• Canada
• Europe (generic tones)
• France
• Germany
• Italy
• Italy2
• Malaysia
• Mexico
• Russia
• Slovakia
• UK
• US (Default)
41-001565-00 REV00 – 10.2014
Valid Values
Global
Tone 1 to 15
Silent
Custom Ring Tone 1 to 8 (if available)
Global:
Tone 1 to 15
Silent
Custom Ring Tone 1 to 8 (if available)
Per-Line Setting:
Global
Tone 1 to 15
Silent
Custom Ring Tone 1 to 8 (if available)
Default Value
Global Setting:
Tone 1
Global Setting:
Tone 1
Per-Line Setting:
Global
19