Phone Lock - Mitel 6863i User Manual

Customizing Your Phone
Enabling/Disabling Directories and Renaming Labels Using the IP Phone UI
Note:
This option is only available if external Directory sources have been configured by your Administrator.
IP Phone UI
1. Press on the phone to enter the Options List.
2. Select Directory.
Navigate to External Sources and select 4 Enter.
3.
Use the 5 and 2 keys to navigate through the list of Directory sources and select 4 Enter.
4.
Navigate to State and press the 4 Enter key.
5.
Use the 5 and 2 keys to and choose the desired state and press the
6.
The state you selected is immediately applied to the phone.
Navigate to Label and press the 4 Enter key.
7.
8. Using the dialpad keys, enter in the new label and press the
The new label is immediately applied to the phone.
Note:
The 3 key can be used to perfrom a backspace.

Phone Lock

You can lock your phone to prevent the phone from being used or configured. You can lock the phone using any of the
following:
• At the path Options > Phone Lock on the IP phone UI.
• At the path Operations > Phone Lock on the Mitel Web UI.
• At a configured key on the phone. For more information about configuring a Lock/Unlock key on your phone, see
"Phone Lock Key" on page
In the Mitel Web UI, the Operation > Phone Lock path also allows you to perform the following:
• Reset a user password. Clicking on the Reset key in the Reset User Password field displays a screen that allows you to
enter and save a new user password.
• Set an emergency dial plan. An emergency dial plan can be 911, 999, 112, 110 or all of the above. The default emer-
gency dial plan is 911|999|112|110.
The following procedures describe locking the phone, setting an emergency dial plan, and resetting the user password.
40
69.
button or select 4 Set.
button or select 4 Set when finished.
41-001565-00 REV00 – 10.2014