Installing Welding Gun Or Spool Gun - Miller Millermatic 141 Owner's Manual

5-9. Installing Welding Gun Or Spool Gun

OM-264423 Page 18
.
A complete Parts List is available on-line at www.MillerWelds.com
.
Be sure that gun end is tight against drive assembly.
Incorrect installation will have adverse effects on gas flow.
5
Correct
1
3 2
4
Incorrect
1 Drive Assembly
2 Gun Trigger Plug
3 Gun Trigger Receptacle
Route gun trigger plug through front
panel.
Insert plug into receptacle, and
tighten threaded collar.
4 Gun Securing Knob
5 Gun End
Loosen knob. Insert end of gun
through opening in front panel
until it bottoms against drive
assembly. Tighten knob.
Close door.
5
5
Ref. 267 805-A / 267 807-A