Installing/Removing A 3½" Reader In A 3½" Bay (Optional, Smartcard Or Multicard) - Fujitsu CELSIUS R940 Operating Manual

System expansions
► Place the drive cover on the casing (1).
► Slide the drive cover downwards (2) so that the drive cover clicks into the catches.
► If you are not installing a new drive, reinstall the cover (optional) which was
previously removed. The drive bay must be closed off to ensure cooling, to protect
against fire and to prevent the entry of foreign bodies.
► Close the casing (see
It may be necessary to modify the entry for the drive in the BIOS Setup.
Installing/removing a 3½" reader in a 3½" bay
(optional, SmartCard or MultiCard)
Operation of the module is not permitted in Taiwan.
You can for instance install a SmartCard or MultiCard reader in the 3½" drive bay. The
reader is mounted onto a module holder when installed in the casing.
SmartCard or MultiCard readers can be mounted on a module holder (optional).
If you have ordered a device with a SmartCard or MultiCard reader, the module
holder, SmartCard or MultiCard reader are already built in on delivery.
If you have ordered a device without a SmartCard or MultiCard reader, a
blind cover is installed instead of the module holder.
42
"Closing the casing", Page
1
2
34).
Fujitsu