Connecting Vesa Mount On Qbox-1300; Figure 8 Vesa Mount Assembly - Quanmax QBOX-1300 User Manual

Connecting VESA Mount on QBox-1300

1. By sliding the desktop bracket onto the rails of QBox-1300 on the bottom in
either ways from front side or back side.
(1) Tightening the base kit with four screws onto the QBox-1300
(2) Mount the VESA Mount kit on the 1
(3) Adjust the positions you desire and tightening with screws on
QBOX-1300 User's Manual

Figure 8 VESA Mount Assembly

each side of the VESA Mount Kit
23
Chapter 3
st
kit