Date And Time Setting - Watchguard DVR4ENTPACK4 Manual

2.3 Date and Time Setting

Before operating your DVR, please set the date and time on your DVR FIRST.
Note:
Please DO NOT change the date or time of your DVR after the recording function is activated.
Otherwise, the recorded data will be disordered and you will not be able to find the recorded file
to backup by time search. If users change the date or time accidentally when the recording function
is activated, it's recommended to clear all H DD data, and start recording again.
Note:
When first using the DVR, it is recommended to power it on for at least 48 continuous hours after
setting the date & time. This helps to prevent the DVR from resetting the time after disconnecting
the power. If the DVR time settings reset after disconnecting the power, eg. due to a power outage,
the battery might have run out. If this happens, please replace the battery as described in
"APPENDIX 5 DVR BATTERY REPLACEMENT" on page 52.
Right click the mouse button or press "MENU" on the DVR front panel to bring up the
password dialogue box. Use the navigation keys or the USB mouse to enter the DVR admin
password with the on-screen keypad. The default administrator password is 0000. The status
will be changed from
and select "QUICK START"  "TIME SETUP" to set the date & time.
GENERAL
TIME SETUP
EXIT
(key lock) to (administrator). Right-click to show the main menu,
QUICK START
DATE
TIME
10
CONNECTION AND SETUP
2009 / NOV / 17
15 : 35 : 53