Note:
The default setting of SS is 03, which means once an object is detected in more than 3 grids, the
system will get triggered. So the value of SS must be less than the number of grids that you set up for
the motion detection area
3)
TS (Time of Sensitivity)
The "TS" function sets the sensitivity regarding how long one object can stay in the
detection area before triggering the recording. The smaller the value, the higher the
sensitivity for motion detection. The highest sensitivity setting is 00, and the lowest
sensitivity setting is 15. The default setting is 02.
4)
DET
Select if you want to activate the motion detection function for the selected channel
(ON/OFF).
5)
ALARM
Select N.C/N.O depending on your installation need. The default alarm value is
OFF.
6)
AREA
Click "EDIT" to set the motion detection area. There are 16 × 12 grids per camera for all
channels. Pink blocks represent the area that is not being detected while the transparent
blocks are the area under detection.
FREQUENTLY-USED FUNCTIONS
23