Schedule Setting; Record Timer - Watchguard DVR4ENTPACK4 Manual

7) OVERWRITE
Select "ON" to overwrite previously recorded data in your HDD when the HDD is full. When
this function is on and the HDD is full, the DVR will clear 8GB data from the oldest date,
providing continuous recording.
8) EVENT RECORD ALL CHANNEL
Select to record all channels (ON) or record the channel with an event only (OFF)
for any event (motion/alarm/timer etc).
9) KEEP DATA LIMIT (DAYS)
Assign the maximum recording days from 01 to 31 after which all the recorded data will be
removed; or select "OFF" to disable this function.
How to enable motion recording:
‐ Enter menu, go to "ADVANCED CONFIG"
‐ Under "DETECTION", enable "DET" for each camera
‐ Go to "ALERT" and set "MOTION BUZZER" to "OFF"
‐ Go to "RECORD" and set "MANUAL RECORD ENABLE" to "OFF" and "EVENT RECORD ENABLE" to "ON"
How to enable scheduled recording:
‐ Enter menu, go to "ADVANCED CONFIG"
‐ Under "RECORD" set "MANUAL RECORD ENABLE" to "OFF" and "TIMER RECORD ENABLE" to "ON"
‐ You can then select "SCHEDULE SETTING" from the main menu to set the record schedule

5.3 Schedule Setting

Right-click to display the main menu, and select "SCHEDULE SETTING"

5.3.1 Record Timer

Click "RECORD." In "RECORD TIMER", select "ON" to enable the record timer; select the day
and time for this function.
RECORD
DETECTION
EXIT
X axis 0 ~ 24 hours. Each time bar is 30 minutes.
Sunday ~ Saturday
Y axis
SCHEDULE SETTING
RECORD TIMER
0 2 4 6
SUN
MON
TUE
WED
THU
FRI
SAT
21
FREQUENTLY-USED FUNCTIONS
ON
8 10 12 14 16 18 20 22 24