Video Output Switch - Watchguard DVR4ENTPACK4 Manual

4.5 Video Output Switch

The DVR does not support simultaneous video output on a CRT monitor (connected to "MONITOR")
and an LCD monitor (connected to "VGA"). The default video output setting is "AUTO", meaning the
DVR will automatically detect the video output source. When "VGA" and "MONITOR" are both
connected, the default monitor output is VGA.
To change the video output setting manually:
To force the video output via "MONITOR", press the left key ◄ on the DVR front panel during
„
DVR startup.
To force the video output via "VGA", press the right key ► on the DVR front panel during DVR
startup
The setting is changed when you hear a short beep sound.
OR:
When the DVR is powered on and initialised, right-click to show the main menu, and select
"ADVANCE CONFIG"  "DISPLAY"  "DISPLAY OUTPUT PATH".
Select "VGA" to switch to the connected LCD monitor, or "COMPOSITE" to switch to the connected
CRT monitor. The DVR will then reboot for the change to take effect.
CAMERA
DETECTION
ALERT
NETWORK
SNTP
DISPLAY
RECORD
REMOTE
EXIT
ADVANCE CONFIG
DE-INTERLACE
(For Selected Models Only)
FULL SCREEN DURATION
QUAD SCREEN DURATION
DISPLAY COVERT
HDD DISPLAY MODE
DISPLAY OUTPUT PATH
ALPHA BLENDING
(For Selected Models Only)
18
BASIC OPERATION
OFF
03
03
ON
HDD SIZE
AUTO
200