E-Map - Watchguard DVR4ENTPACK4 Manual

Digital video recorder with 4 security cameras

Hide thumbs Also See for DVR4ENTPACK4:

Table of Contents

6.1.4. E-Map

Video Viewer is also a Central Management System (CMS) software, which allows network

device control & management for up to 16 devices simultaneously.

Note: Before using this function, make sure Video Viewer is connected to all the devices you want to monitor.

E-Map is ONLY available when the control panel is switch to the full function version.

How to Add an E-Map Group

STEP 1: In the simplified version, click "

version, and click "

Note: To know where the buttons are, please refer to "Simplified Version" on page 32, and "Full Function

Version" on page 33.

STEP 2: Right-click to show the shortcut menu on the top-left panel, and select the

E-Map group you want to add. There are three E-Map groups you can add:

Google E-MAP, Single E-MAP, and Building E-MAP.

" to switch the control panel to the full function

" to enter the E-Map page as follows.

REMOTE OPERATION

Table of Contents

Do you have a question about the DVR4ENTPACK4 and is the answer not in the manual?