Detailed Record Setting - Watchguard DVR4ENTPACK4 Manual

3) IMAGE PER SECOND
Select the images per second for MANUAL RECORD.

5.2.2 Detailed record setting

Right-click to display the main menu, and select "ADVANCE CONFIG"  "RECORD"
Note:
Please DO NOT change the date or time of your DVR after the recording function is activated.
Otherwise, the recorded data will be disordered and you will not be able to find the recorded file
to backup by time search. If users change the date or time accidentally when the recording
function is activated, it's recommended to clear all data on the HDD, and start recording again.
CAMERA
DETECTION
ALERT
NETWORK
SNTP
DISPLAY
RECORD
REMOTE
EXIT
1) MANUAL RECORD ENABLE
Set the manual recording function ON/OFF.
2) EVENT RECORD ENABLE
Set the event recording function ON/OFF.
3) TIMER RECORD ENABLE
Set the timer recording function ON/OFF.
4) EVENT RECORD IPS
Select the images per second for EVENT RECORD mode (Recording that is triggered by
alarm or motion).
5) TIMER RECORD IPS
Select the images per second for TIMER RECORD mode (Recording that is activated
according to the scheduled time).
6) PRE-ALARM RECORD
Select to enable or disable the pre-alarm function (ON/OFF).
When pre-alarm and event recording functions are both activated, the DVR will record 8MB
data before an alarm/motion event is triggered.
ADVANCE CONFIG
MANUAL RECORD ENABLE
EVENT RECORD ENABLE
TIMER RECORD ENABLE
EVENT RECORD IPS
TIMER RECORD IPS
PRE-ALARM RECORD
OVERWRITE
EVENT RECORD ALL CHANNEL
KEEP DATA LIMIT (DAYS)
20
FREQUENTLY-USED FUNCTIONS
ON
ON
ON
100
100
ON
ON
OFF
OFF