6.1.8
Adjust
You can adjust detail camera settings in this page.
Camera: Select a desired camera for adjusting the following settings.
Device Title: Enter a camera title.
Record Dual Stream: Select to enable or disable the dual streams recording function.
Record Mode: Select a recording mode from the drop-down list.
Normal+Event: Set all cameras to the Continuous and Event recording mode.
Event Only: Set all cameras to the Event only recording mode.
Ratio: Select 4:3 or 16:9 display aspect ratio of a camera, and its video will be displayed in 4:3 or
16:9 format on that channel screen. Please refer to 2.3.2 Display Aspect Ratio for more details.
Connected Channel: Check the box to enable the connection between the camera and the NVR.
If the box is unchecked, the system will disconnect the camera and stop recording.
Mask Channel: Check the box to mask the camera's live view on the screen, but the recording
function is still on.
Brightness: Move the bar to adjust the brightness.
78
ECOR HD 16X1 DVR