Table of Contents
Advertisement
2.3 Basic Connection
ENVR8304X 04CH:
Main Monitor
(HDMI)
1. To view videos, connect a monitor to the HDMI or VGA port using the HDMI or VGA cable
supplied by the monitor manufacturer.
2. Connect a microphone to the audio input and output socket of the NVR using the supplied
Audio Cable. Note that the microphone and speaker with a (built-in) amplifier and external
power supply is required.
3. To receive video streams or to manage the NVR over network, use a standard RJ-45 CAT5
10/100Mb Ethernet cable to connect the LAN port to the network. Please refer to 2.5
Connecting the NVR to the Network.
4. Optionally connect a mouse or a keyboard (EKB200) to the NVR to control the system. You can
also control the system using the supplied IR Remote Controller.
5. Use the supplied Power Cord with Adaptor to connect one end to the DC 12V port on the NVR
and the other end to the power outlet.
1
Audio Cable
Main Monitor
(VGA)
Line Level
Web Remote
Audio In 1~5
18
4
3
2
Network
Mouse /
EKB200
IP Camera
Genie XMS
Client
ECOR HD 16X1 DVR
5
Power
supply
CMS:
Advertisement
Table of Contents
