Motion - EverFocus ENVR8304X 04CH User Manual

ECOR HD 16X1 DVR
6.3.3

Motion

Camera: Select a camera to be configured.
Enable: Check the box to enable the Motion Event settings for the selected camera.
Log: Check the box to record motion events to log data.
Pre-alarm Record: Check the box to start copying the recordings to the hard disk from 5
seconds before the motion event occurs. Note that the pre-alarm recording rate will follow the
Normal Speed configured in the above section (see 6.1.3 Basic).
Buzzer: Check the box to enable the buzzer when a motion event is triggered.
Email Notify: Check the box to send email notification when a motion event is detected. Email
operation requires valid email entered in the Email setup menu (see 6.6.2 Email).
Network Alarm: Check the box to send out a network alarm to a client PC when motion occurs.
This feature works with EverFocus' CMS software. You will need to configure the Alarm Server
for the NVR to send network alarms to the client PC (see 6.6.5 Alarm Server).
Auto Lock: Check the box and the events will be recorded in a write protected segment of the
hard disk (will not be overwritten). The NVR will lock a period of time when the alarm occurs.
The length of the time depends on NVR setting (see 6.4.2 Lock / Format).
91