Table of Contents
Advertisement
6.1.6
Tracking
To set up the Auto Tracking function:
1.
Auto Tracking Start Point: Check the box to enable a camera position to which the camera
will return to after a tracking operation. Use the direction buttons to adjust the camera view
to a desired position where you want to set up the position as the Auto Tracking Start Point.
You can select the pan / tilt speed from the Speed drop-down list for controlling the direction
buttons. Adjust zoom, focus and Iris if necessary. Click Set to set the position as the Auto
Tracking Start Point.
Note: If the user did not set up a start point or the start point is disabled, the camera will go
back to track/monitor the initial point instead of the Auto Tracking Start Point, once the
tracked object exits in the camera's field of view.
2.
Pan/Tilt Limit: Check the box if you want to create a zone where the camera will track the
movement inside the zone only. Before clicking the Upper/Lower/Right/Left buttons, use the
direction buttons to adjust the camera view to a desired position where you want the camera
to track the movement in that zone. You can select the pan / tilt speed from the Speed
drop-down list for controlling the direction buttons. Adjust zoom, focus and Iris if necessary.
Click the Upper/Lower/Right/Left buttons to set up the Pan/Tilt limits (Left and Right for the
Pan limit; Upper and Lower for the Tilt limit).
74
ECOR HD 16X1 DVR
Advertisement
Table of Contents
