ENVR8304X 08CH / 16CH:
To select the NVR ID,
1.
Aim at the IR receiver of your NVR.
2.
Select the NVR ID number by pressing the NVR Device ID Button first.
The NVR ID number here must correspond to the "IR Remote ID"
set up in the "I/O Control Menu", and remember to click Save on
that setting page (refer to 6.8.5 I/O Control).
For example, if you set up "2" in the OSD setting page, you
need to press "2" on the controller.
3.
Now you can control the NVR.
172
ECOR HD 16X1 DVR
NVR Device ID
Button
Channel
Button