EverFocus ENVR8304X 04CH User Manual page 82

Auto Pan: You can only configure one Auto Pan sequence. The configured Auto Pan (A to B Pan)
sequence will always be numbered as "1". The number "2" will always be an endless pan around
the given (not preconfigured) X/Y tilt axis.
Endless Mode: The Endless Mode is always numbered as "99" in the PRESET function. If you select
On, the Preset number "99" will be the 360
number "99" will be the preconfigured A to B Pan function. To use the function, go to PTZ live view
page first. Click the Preset button and click the Preset number "99". Finally, click Go to activate the
Endless Mode.
To set up an Auto Pan Sequence:
1. Using the direction buttons to adjust the camera view to a desired position where you want to
set up the position as the Left Position. You can select the pan / tilt speed from the Speed
drop-down list for controlling the direction buttons. Adjust zoom, focus and Iris if necessary.
2. Click the Set L Position button to save the current position as the Left Position.
3. Follow Step 1 to set up the Right Position and then click the Set R Position to save the current
position as the Right Position.
4. Enter a dwell time (1~99 seconds) for the Left and Right positions (the time that the camera
will pause at each position).
5. Enter a speed (1~255) at which the camera will move during the Auto Pan sequence.
6. Click Save to save the settings.
To activate the configured Auto Pan on the PTZ Live View window, click the PTZ
Menu Bar. Click the Auto Pan button, click "1" on the numeric buttons and then click the Go
button. The camera will continuously move to the left and right positions which you have
configured. Click "2" on the numeric buttons and then click the Go button will force the camera to
pan 360 endlessly. To stop the Auto Pan function, click the Stop button
°
panel.
endless pan function; if you select Off, the Preset
°
73
ECOR HD 16X1 DVR
icon on the
on the PTZ Control