ECOR HD 16X1 DVR
7.3.3 Basic
You can also add the IP camera manually by typing its IP Address, Port, ID, Password and other
settings.
Address: Type the IP address of the camera.
Port: The default port is 80.
ID: Enter the account username of the camera.
Password: Enter the password of the camera.
Add to Channel: Select a channel number to add this camera to that channel.
Protocol: The data transmission protocol.
Brand: The brand of the camera.
Model: The model type of the camera.
Auto Detection: After entering the IP address, port, ID, password and selecting a channel, click
this button to auto detect the protocol, brand and model of the camera.
Add: Click to add the camera, and bring up the detailed setting page (please see Figure and the
instructions below).
Cancel: Click to cancel the changes and return to the previous settings.
145