EverFocus ENVR8304X 04CH User Manual page 22

ECOR HD 16X1 DVR
ENVR8304X 08CH / 16CH:
1. Make sure the NVR is power-off.
2. Unscrew the ten housing screws on the NVR, and open the housing.
3. Screw two HDD brackets on both sides of the HDDs using the Sliver Screws.
Silver Screw
HDD Bracket
4. Use the SATA Cable, and connect one end to the SATA port on the small PCB inside the NVR,
and the other end to the SATA port on the HDD.
13