EverFocus ENVR8304X 04CH User Manual page 137

ECOR HD 16X1 DVR
Stop Bit: This field is to set the stop bit for the RS232 connection. There are two different stop
bits, 1 or 2.
Parity: This field is to select the parity level at which you will be connected. You can choose
between None, Odd, or Even parity levels.
Control: One remote control can be used to operate four NVRs. The NVR to be addressed is
selected by pressing the key corresponding to its ID number on the IR Remote control. Please
refer to Appendix C: IR Remote Control.
IR Controller ID: Set up an ID for the NVR and allow the IR remote control to control this NVR.
128