Camera Selection; Enabling Audio - EverFocus ENVR8304X 04CH User Manual

3.5 Camera Selection

You can control each camera individually by selecting that camera. To select a camera, follow
the instructions below:
1. Click a camera on the screen, and the selected camera will be highlighted with a red frame.
2. All cameras will be selected when you scrolling the mouse up / down between the first and
the last channel.
3. Double clicking on a channel screen will display full screen for this channel.

3.6 Enabling Audio

In order to utilize the audio output function, you need to enable the Record Audio function.
Please follow the instructions below before switching on the audio function.
Note: The Audio function is unavailable for Germany.
1. Connect the audio source and/or audio output device to the NVR. Note that both of the
audio input and output devices require a (built-in) amplifier and external power supply.
2. Go to Camera setting menu (OSD Root Menu > Configuration > Camera > Advanced).
3. Click the M button of the camera you want to configure and then click Next.
4. Enable the Record Audio option.
To turn on the audio function, please see the instructions below:
1. In the Live View window, select a channel by clicking once on the desired channel screen.
2. On the bottom of the screen, click the Audio icon
to the desired camera.
3. Click the Audio icon
Note: The NVR only provide one channel audio output. You can switch the Audio Output
function to either one from the 4/8/16 cameras.
again to disable the Audio Output function.
40
ECOR HD 16X1 DVR
to switch the Audio Output function