Fujitsu SP-1120 Operator's Manual page 93

Chapter 8 Operational Settings
Resetting the Password
In case you forgot your password, it can be reset in the
following procedure.
1
Right-click the Software Operation Panel icon in the
notification area, and select [Password Setting] from the
menu.
 The [Password setting] dialog box appears.
2
Enter the default password which is "SP-Scanner", and
click the [OK] button.
 The [Password setting] dialog box appears.
3
Enter a new password then again to confirm, and click the
[OK] button.
Up to 32 characters can be used for the password.
Note that only alphanumeric characters (a to z, A to Z, 0 to 9) are
allowed.
 A confirmation message appears.
4
Click the [OK] button.
 The password is set.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
93