Device Errors - Fujitsu SP-1120 Operator's Manual

Chapter 7 Troubleshooting

Device Errors

The following are lists of device errors which require troubleshooting by a service engineer.
Check Power
indicator indicator
Flashes 2 On
times
Flashes 3 On
times
Flashes On
(continual)
Item
Optical error (ADF Front) 1 Clean the glass section.
2 Turn the scanner off then back on.
Optical error (ADF Back)
Other error Turn the scanner off then back on.
If the problem persists, write down the status of the indicators and contact your
FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
Resolution
For details, refer to "Chapter 5 Daily Care" (page
If the problem persists, write down the status of the indicators and contact your
FUJITSU scanner dealer or an authorized FUJITSU scanner service provider.
48).
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
67