Fujitsu SP-1120 Operator's Manual page 71

Chapter 7 Troubleshooting
The image quality of pictures/photos is poor or
dirty.
Is black & white set in the scanner driver?
No
Are the glass parts inside the ADF clean?
Yes
*1: Scanned images may significantly differ from the original if you scan pictures or photos in black & white.
Configure settings in the scanner driver not to simply binarize (black and white)
pictures/photos in grayscale, then scan again. (*1)
Yes
Clean the inside of the ADF.
For details, refer to "Chapter 5 Daily Care" (page
No
If the problem persists, check the items in
Service Provider" (page 82)
authorized FUJITSU scanner service provider.
48).
"7.4 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or an
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
71