Main Features - Fujitsu SP-1120 Operator's Manual

Chapter 1 Scanner Overview

1.1 Main Features

This section explains about the main features of this product.
The scanner is equipped with the following features:
High speed scanning
Realizes a scanning speed of 20 ppm/40 ipm (SP-1120) (*1), 25 ppm/50
ipm (SP-1125) (*1), or 30 ppm/60 ipm (SP-1130) (*1). Furthermore, you
can load up to 50 sheets of documents for continuous scanning which
allows you to quickly digitize a large volume of documents.
Improved efficiency for pre-scan work
The scanner can perform "batch scanning" which allows you to scan
documents with different paper sizes at once, simplifying the process of
sorting the documents before scanning.
Reduced work loss caused by multifeeds
The scanner has an ultrasonic multifeed sensor that accurately detects
multifeed errors where two or more sheets are fed through the scanner
at once. This multifeed detection is reliable even when scanning a mixed
batch of documents with different paper sizes, avoiding potential work
loss.
Central administration of scanner
The bundled application "Scanner Central Admin Agent" allows central
administration of multiple scanners. For example, you can update the
scanner settings and drivers and monitor the operating status of the
scanner.
For details, refer to the Scanner Central Admin User's Guide.
*1: When scanning A4 size documents at 300 dpi with JPEG compression.
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
12