Vertical Streaks Appear On The Scanned Image - Fujitsu SP-1120 Operator's Manual

Chapter 7 Troubleshooting

Vertical streaks appear on the scanned image.

Do the streaks always appear in the same location?
No
Does the vertical streak disappear when you set a lower
resolution?
No
Is there any foreign matter (e.g. dust, paper dust) on the
document?
No
Clean the glass parts and rollers inside the ADF.
For details, refer to "Chapter 5 Daily Care" (page
Yes
Specify a lower resolution.
Yes
Remove any foreign matter from the document.
It may be carried onto the glass parts inside the ADF and cause vertical streaks on
Yes
the scanned image.
If the problem persists, check the items in
Service Provider" (page 82)
authorized FUJITSU scanner service provider.
48).
"7.4 Before You Contact the Scanner
first, then contact your FUJITSU scanner dealer or an
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
How to Use the
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
74