Fujitsu SP-1120 Operator's Manual page 86

Chapter 8 Operational Settings
8.1 Starting Up the Software Operation Panel
The Software Operation Panel is installed together with the
PaperStream IP driver.
This application allows you to configure various settings such
as the operation of the scanner and managing the
consumables.
ATTENTION
 Do not use the operator panel while the Software Operation Panel is
running.
 If you connect multiple scanners, only the first scanner will be
recognized.
Connect only one scanner at a time.
1
Check that the scanner is connected to the computer,
then turn on the scanner.
For details about how to turn on the scanner, refer to
Power ON/OFF" (page 16).
2
Display the [Software Operation Panel] window.
 Windows Vista/Windows Server 2008/Windows 7
Select the [Start] menu  [All Programs]  [SP Series] 
[Software Operation Panel].
 Windows Server 2012/Windows 8
Right-click the Start screen, and select [All apps] on the app
bar  [Software Operation Panel] under [
 Windows Server 2012 R2/Windows 8.1
Select [
[Software Operation Panel] under [
To display [
"1.3 Turning the
] on the lower left side of the Start screen 
↓
SP Series
], move the mouse cursor.
↓
TOP
Contents
Index
Introduction
Scanner
Overview
How to Load
Documents
].
SP Series
How to Use the
].
Operator Panel
Various Ways to
Scan
Daily Care
Replacing the
Consumables
Troubleshooting
Operational
Settings
Appendix
Glossary
86